Your source
Identify the water supplier or well and bring any available water results.

Kelowna and Area: (778) 477-6660
Alberta Area: (780) 229-4475
Saskatchewan Area (306) 790-0551
Water treatment in Sylvan Lake
Start with what reaches your home. We review the supply, the concerns at your taps and your household demand, then explain how the proposed treatment stages fit together.
Sylvan Lake · Alberta

The everyday difference
Tell us whether you use the municipal supply or a private well. Scale, staining, taste and drinking-water preferences are different concerns; the assessment helps identify the appropriate next step.

Identify the water supplier or well and bring any available water results.
Tell us about scale, staining, taste, odour or a change in flow.
Consider household use, plumbing, equipment space and access for service.
LiveSmart water-quality summary
This page includes the available dated public measurements below. Hardness is shown in grains per gallon where the source provides enough information to report or convert it. Parameters not present in the published source should not be interpreted as zero.
Conversions of the published hardness results retained on this page. Each row keeps its sample or supply context; these are not additional tests or a single current community average.
| Sample / source context | Sample date | Hardness (mg/L as CaCO₃) | Hardness (GPG) |
|---|---|---|---|
| Lower zone · North · Routine chemistry · Two treated-water zones | See the dated source table below | 334 | 19.5 GPG |
| Upper zone · South · Routine chemistry · Two treated-water zones | See the dated source table below | 227 | 13.3 GPG |
1 grain per US gallon = 17.118 mg/L as CaCO₃. Original laboratory units, dates, and source links remain with the water results below.
Local water information
Sylvan Lake’s published treated-water analysis distinguishes the lower and upper zones. The Town describes the lower zone as north of 47 Avenue and the upper zone as south of 47 Avenue.
Sampled August 25, 2025 · Reported September 5, 2025 · AGAT 25R337448
The two columns are separate samples from the Town’s 2025 routine chemistry analysis.
| Parameter | Unit | Lower zone · North | Upper zone · South |
|---|---|---|---|
| Hardness | mg/L as CaCO₃ | 334 | 227 |
| Calculated TDS | mg/L | 434 | 494 |
| pH | pH units | 7.94 | 7.99 |
| Total alkalinity | mg/L as CaCO₃ | 396 | 421 |
| Phenolphthalein alkalinity | mg/L as CaCO₃ | <5 | <5 |
| Bicarbonate | mg/L | 483 | 513 |
| Carbonate | mg/L | <5 | <5 |
| Hydroxide | mg/L | <5 | <5 |
| Electrical conductivity | µS/cm | 733 | 830 |
| Chloride | mg/L | 13.9 | 23.3 |
| Fluoride | mg/L | 0.09 | 0.10 |
| Nitrate | mg/L | 2.7 | 3.8 |
| Nitrate as nitrogen | mg/L | 0.61 | 0.86 |
| Nitrite | mg/L | <0.005 | <0.005 |
| Nitrite as nitrogen | mg/L | <0.001 | <0.001 |
| Nitrate + nitrite as nitrogen | mg/L | 0.61 | 0.86 |
| Sulphate | mg/L | 21.9 | 27.7 |
| Dissolved calcium | mg/L | 52.1 | 42.8 |
| Dissolved magnesium | mg/L | 49.5 | 29.1 |
| Dissolved sodium | mg/L | 53.4 | 113 |
| Dissolved potassium | mg/L | 3.08 | 2.45 |
| Dissolved iron | mg/L | <0.001 | <0.001 |
| Dissolved manganese | mg/L | <0.00005 | 0.00007 |
| Sodium adsorption ratio | ratio | 1.27 | 3.27 |
| Ion balance | % | 103 | 98 |
Iron, manganese and the other cations in this report are dissolved measurements. When comparing reports, check whether each result measures dissolved or total metals.
Read the Town’s 2025 water analysis ↗These are dated public results for the locations shown, not a current test of your home. “<” means below the stated reporting limit, not zero. The linked reports contain the full results and laboratory notes. Sources checked September 12, 2026. Follow your supplier’s current notices and advisories.
How we approach it
We explain the purpose of the selected equipment and the practical installation requirements.
A complete treatment plan
A few useful answers
The source alone does not establish an iron problem. Appropriate readings and operating conditions guide whether iron treatment is needed.
We review space for the filters and tank, the faucet position and service access. Photos of the cabinet and plumbing are a useful starting point.
Start with your water
Tell us where you are, what you’re noticing and what space you have. We’ll help you understand the next step.
A LiveSmart recommendation for every home
LiveSmart recommends a HydroPure reverse-osmosis drinking-water system in every home for cleaner, better-tasting water used for drinking, coffee, cooking and ice. Municipal treatment protects the public supply; point-of-use RO provides an additional treatment step at the kitchen tap. Reduction claims depend on the verified system configuration, certification and proper maintenance.
Recommended for every home. Final configuration is selected for the household and verified against the water at the tap.
Explore HydroPure RO ↗When testing confirms hardness, disinfectant taste or odour, iron, manganese, sediment or microbiological concerns, LiveSmart can add the appropriate SoftFlow, CarbonShield, IronShield or UV Guard treatment.
Explore treatment options ↗Community results are a starting point. Household demand, flow, available space and plumbing are checked before equipment is sized and built.
See real installations ↗Friends for Life
Your LiveSmart journey continues with commissioning details, My Water Passport, equipment and water-history records, practical support and agreed customer-care follow-up. We help you plan filter changes and service as your home’s needs change.