HydroPure RO
Recommended for every home. Final configuration is selected for the household and verified against the water at the tap.
Explore HydroPure RO ↗top of page
LiveSmart
by Neighbourhood Home Protection
Kelowna and Area: (778) 477-6660
Alberta Area: (780) 229-4475
Saskatchewan Area (306) 790-0551
AB
Water results for Redwater
EPCOR’s March 2026 regional map places this community on the Highway 28/63 network supplied from Edmonton. The utility’s Edmonton results below describe the upstream supply, not samples taken in every local neighbourhood.
Understanding your local water
Where your water comes from
EPCOR’s March 2026 regional map places this community on the Highway 28/63 network supplied from Edmonton. The utility’s Edmonton results below describe the upstream supply, not samples taken in every local neighbourhood.
Hardness and everyday use
The supplier’s hardness results show that dissolved hardness can be relevant to scale, soap performance and appliance care. Use a test at your home to choose softener capacity and settings; an annual average or regional sample is not an equipment sizing measurement.
Chloramine, taste and filtration
The upstream utility uses chloramine for disinfection. If your goal is to improve taste or odour, compare filtration with a specific chloramine-reduction claim and a suitable flow rating. A water softener addresses hardness; it does not replace that filtration stage.
Reading the public results
These records give Redwater residents a way to investigate their supplier’s water. Keep the sample location, date, units and result type together when comparing numbers. Local distribution conditions, plumbing and private wells require separate assessment.
LiveSmart water-quality summary
Published water-quality measurements.
This page includes the available dated public measurements below. Hardness is shown in grains per gallon where the source provides enough information to report or convert it. Parameters not present in the published source should not be interpreted as zero.
Hardness in grains per gallon.
Conversions of the published hardness results retained on this page. Each row keeps its sample or supply context; these are not additional tests or a single current community average.
View hardness results in GPG
| Sample / source context | Sample date | Hardness (mg/L as CaCO₃) | Hardness (GPG) |
|---|---|---|---|
| Total Hardness · June mean · EPCOR Edmonton · June 2026 summary, section 2.1.1 | See the dated source table below | 168.2 | 9.8 GPG |
| Total Hardness · June range · EPCOR Edmonton · June 2026 summary, section 2.1.1 | See the dated source table below | 153.0 - 186.0 | 8.9 - 10.9 GPG |
| Total Hardness · YTD mean · EPCOR Edmonton · June 2026 summary, section 2.1.1 | See the dated source table below | 176.2 | 10.3 GPG |
| Total Hardness · YTD range · EPCOR Edmonton · June 2026 summary, section 2.1.1 | See the dated source table below | 146.0 - 204.0 | 8.5 - 11.9 GPG |
1 grain per US gallon = 17.118 mg/L as CaCO₃. Original laboratory units, dates, and source links remain with the water results below.
Local water information
Published water results
for Redwater.
EPCOR’s March 2026 regional map places this community on the Highway 28/63 network supplied from Edmonton. The utility’s Edmonton results below describe the upstream supply, not samples taken in every local neighbourhood.
Edmonton treatment plants · June and year to date
June 2026; year to date January–June 2026
Combined Edmonton drinking-water treatment-plant statistics. These are not measurements of a specific home or of every regional customer’s distribution system. Regional context for Redwater: these are the named supplier’s results, not local tap samples.
| Parameter | Unit | June samples | June mean | June range | YTD samples | YTD mean | YTD range |
|---|---|---|---|---|---|---|---|
| Alkalinity total | mg CaCO3/L | 60 | 103.9 | 79.0 - 117.0 | 360 | 116.6 | 79.0 - 139.0 |
| Aluminum | mg/L | 2 | 0.044 | 0.039 - 0.049 | 12 | 0.064 | 0.016 - 0.172 |
| Arsenic | mg/L | 2 | 0.0002 | <0.0002 | 12 | 0.0002 | <0.0002 - 0.0002 |
| Bromate Dissolved | mg/L | 10 | 0.006 | <0.005 - 0.010 | 56 | 0.005 | <0.005 - 0.010 |
| Bromodichloromethane | µg/L | 60 | 1.5 | 0.8 - 2.6 | 360 | 1.1 | <0.5 - 2.6 |
| Cadmium | mg/L | 2 | <0.00002 | <0.00002 | 12 | <0.00002 | <0.00002 |
| Calcium Hardness | mg/L CaCO3 | 60 | 113.7 | 103.0 - 132.0 | 360 | 116.9 | 96.0 - 136.0 |
| Chlorate Dissolved | mg/L | 10 | 0.21 | 0.11 - 0.35 | 56 | 0.20 | 0.09 - 0.50 |
| Chloride Dissolved | mg/L | 10 | 8.4 | 6.7 - 9.6 | 56 | 7.5 | 4.8 - 16.2 |
| Chlorine total | mg/L | 60 | 2.07 | 1.72 - 2.24 | 361 | 2.03 | 1.54 - 2.27 |
| Chlorite Dissolved | mg/L | 10 | 0.006 | <0.005 - 0.010 | 56 | 0.008 | <0.005 - 0.136 |
| Chloroform | µg/L | 60 | 22.5 | 11.9 - 35.1 | 360 | 14.2 | 3.8 - 35.1 |
| Chromium | mg/L | 2 | <0.0002 | <0.0002 | 12 | 0.0002 | <0.0002 |
| Colour | TCU | 60 | 0.9 | <0.5 - 1.5 | 360 | 0.8 | <0.5 - 1.7 |
| Conductivity | µS/cm | 10 | 472.3 | 388.0 - 609.0 | 53 | 413.0 | 357.0 - 609.0 |
| Copper | mg/L | 2 | <0.002 | <0.002 | 12 | 0.002 | <0.002 |
| Cryptosporidium | oocysts/100L | 2 | <0.1 | <0.1 | 12 | <0.1 | <0.1 |
| Fluoride | mg/L | 60 | 0.67 | 0.61 - 0.76 | 360 | 0.70 | 0.61 - 0.78 |
| Giardia | cysts/100L | 2 | <0.1 | <0.1 | 12 | <0.1 | <0.1 |
| Haloacetic acids total (HAA5) | µg/L | 2 | 17.7 | 16.0 - 19.3 | 12 | 16.3 | 11.3 - 19.3 |
| Iron | mg/L | 2 | <0.005 | <0.005 | 12 | <0.005 | <0.005 |
| Manganese | mg/L | 2 | <0.002 | <0.002 | 12 | 0.002 | <0.002 - 0.003 |
| Mercury | µg/L | 2 | <0.0050 | <0.0050 | 14 | <0.0050 | <0.0050 |
| Nitrate (as N) dissolved | mg/L | 10 | 0.10 | 0.07 - 0.19 | 56 | 0.08 | 0.02 - 0.22 |
| Nitrite (as N) dissolved | mg/L | 10 | 0.02 | 0.02 | 56 | 0.02 | 0.02 |
| Nitrosodimethylamine, N- [NDMA] | µg/L | 2 | 0.00135 | <0.00108 - 0.00162 | 12 | 0.00108 | <0.0009 - 0.00108 |
| pH | pH units | 60 | 8 | 8 | 360 | 8 | 8 |
| Potassium | mg/L | 2 | 0.9 | 0.8 - 0.9 | 12 | 1.0 | 0.7 - 2.0 |
| Sodium | mg/L | 2 | 13.5 | 12.5 - 14.4 | 12 | 11.4 | 6.6 - 21.6 |
| Sulphate Dissolved | mg/L | 10 | 98.7 | 77.9 - 122.0 | 56 | 77.6 | 62.0 - 122.0 |
| Total Dissolved Solids | mg/L | 2 | 253.00 | 250.00 - 256.00 | 12 | 227.83 | 213.00 - 256.00 |
| Total Hardness | mg/L CaCO3 | 60 | 168.2 | 153.0 - 186.0 | 360 | 176.2 | 146.0 - 204.0 |
| Total Organic Carbon | mg/L | 10 | 2.5 | 1.2 - 3.3 | 52 | 1.6 | 0.9 - 3.3 |
| Trihalomethanes | µg/L | 60 | 24.2 | 13.4 - 37.4 | 360 | 15.5 | 5.3 - 37.4 |
| Turbidity | NTU | 60 | 0.05 | <0.04 - 0.13 | 360 | 0.05 | <0.04 - 0.32 |
| Uranium | mg/L | 2 | <0.0005 | <0.0005 | 12 | 0.0005 | <0.0005 - 0.0006 |
| Zinc | mg/L | 2 | <0.005 | <0.005 | 12 | <0.005 | <0.005 |
Means and ranges are reproduced as reported, including reporting-limit symbols. The original report includes additional parameters and sampling targets.
EPCOR · Original June 2026 summary ↗These are dated public results for the locations shown, not a current test of your home. “<” means below the stated reporting limit, not zero. The linked reports contain the full results and laboratory notes. Sources checked September 13, 2026. Follow your supplier’s current notices and advisories.
Water questions in Redwater
Are these samples from my home in Redwater?
No. The location in each table identifies where the utility sampled. Regional results provide context for a connected home, but do not establish the result at your tap.
Which treatment should I consider?
The supplier’s hardness results show that dissolved hardness can be relevant to scale, soap performance and appliance care. Use a test at your home to choose softener capacity and settings; an annual average or regional sample is not an equipment sizing measurement.
What if my property uses a private well?
Confirm the source before using these tables. A private well needs its own water analysis; regional municipal results do not describe it.
Start with your water
Understand the water
at your own taps.
Tell us where you are, what you’re noticing and what space you have. We’ll help you understand the next step.
A LiveSmart recommendation for every home
Better drinking water starts with HydroPure RO.
LiveSmart recommends a HydroPure reverse-osmosis drinking-water system in every home for cleaner, better-tasting water used for drinking, coffee, cooking and ice. Municipal treatment protects the public supply; point-of-use RO provides an additional treatment step at the kitchen tap. Reduction claims depend on the verified system configuration, certification and proper maintenance.
Whole-home treatment
When testing confirms hardness, disinfectant taste or odour, iron, manganese, sediment or microbiological concerns, LiveSmart can add the appropriate SoftFlow, CarbonShield, IronShield or UV Guard treatment.
Explore treatment options ↗Built for the home
Community results are a starting point. Household demand, flow, available space and plumbing are checked before equipment is sized and built.
See real installations ↗Friends for Life
Personal care, through the years.
Your LiveSmart journey continues with commissioning details, My Water Passport, equipment and water-history records, practical support and agreed customer-care follow-up. We help you plan filter changes and service as your home’s needs change.
bottom of page