top of page

AB

Water results for Calmar

EPCOR’s March 2026 regional map places this community on the Capital Region Southwest network supplied from Edmonton. The utility’s Edmonton results below describe the upstream supply, not samples taken in every local neighbourhood.

Understanding your local water

Where your water comes from

EPCOR’s March 2026 regional map places this community on the Capital Region Southwest network supplied from Edmonton. The utility’s Edmonton results below describe the upstream supply, not samples taken in every local neighbourhood.

Read the utility report ↗

Hardness and everyday use

The supplier’s hardness results show that dissolved hardness can be relevant to scale, soap performance and appliance care. Use a test at your home to choose softener capacity and settings; an annual average or regional sample is not an equipment sizing measurement.

Read the utility report ↗

Chloramine, taste and filtration

The upstream utility uses chloramine for disinfection. If your goal is to improve taste or odour, compare filtration with a specific chloramine-reduction claim and a suitable flow rating. A water softener addresses hardness; it does not replace that filtration stage.

Read the utility report ↗

Reading the public results

These records give Calmar residents a way to investigate their supplier’s water. Keep the sample location, date, units and result type together when comparing numbers. Local distribution conditions, plumbing and private wells require separate assessment.

Local water information

Published water results
for Calmar.

EPCOR’s March 2026 regional map places this community on the Capital Region Southwest network supplied from Edmonton. The utility’s Edmonton results below describe the upstream supply, not samples taken in every local neighbourhood.

Edmonton treatment plants · June and year to date

June 2026; year to date January–June 2026

Combined Edmonton drinking-water treatment-plant statistics. These are not measurements of a specific home or of every regional customer’s distribution system. Regional context for Calmar: these are the named supplier’s results, not local tap samples.

EPCOR Edmonton · June 2026 summary, section 2.1.1
ParameterUnitJune samplesJune meanJune rangeYTD samplesYTD meanYTD range
Alkalinity totalmg CaCO3/L60103.979.0 - 117.0360116.679.0 - 139.0
Aluminummg/L20.0440.039 - 0.049120.0640.016 - 0.172
Arsenicmg/L20.0002<0.0002120.0002<0.0002 - 0.0002
Bromate Dissolvedmg/L100.006<0.005 - 0.010560.005<0.005 - 0.010
Bromodichloromethaneµg/L601.50.8 - 2.63601.1<0.5 - 2.6
Cadmiummg/L2<0.00002<0.0000212<0.00002<0.00002
Calcium Hardnessmg/L CaCO360113.7103.0 - 132.0360116.996.0 - 136.0
Chlorate Dissolvedmg/L100.210.11 - 0.35560.200.09 - 0.50
Chloride Dissolvedmg/L108.46.7 - 9.6567.54.8 - 16.2
Chlorine totalmg/L602.071.72 - 2.243612.031.54 - 2.27
Chlorite Dissolvedmg/L100.006<0.005 - 0.010560.008<0.005 - 0.136
Chloroformµg/L6022.511.9 - 35.136014.23.8 - 35.1
Chromiummg/L2<0.0002<0.0002120.0002<0.0002
ColourTCU600.9<0.5 - 1.53600.8<0.5 - 1.7
ConductivityµS/cm10472.3388.0 - 609.053413.0357.0 - 609.0
Coppermg/L2<0.002<0.002120.002<0.002
Cryptosporidiumoocysts/100L2<0.1<0.112<0.1<0.1
Fluoridemg/L600.670.61 - 0.763600.700.61 - 0.78
Giardiacysts/100L2<0.1<0.112<0.1<0.1
Haloacetic acids total (HAA5)µg/L217.716.0 - 19.31216.311.3 - 19.3
Ironmg/L2<0.005<0.00512<0.005<0.005
Manganesemg/L2<0.002<0.002120.002<0.002 - 0.003
Mercuryµg/L2<0.0050<0.005014<0.0050<0.0050
Nitrate (as N) dissolvedmg/L100.100.07 - 0.19560.080.02 - 0.22
Nitrite (as N) dissolvedmg/L100.020.02560.020.02
Nitrosodimethylamine, N- [NDMA]µg/L20.00135<0.00108 - 0.00162120.00108<0.0009 - 0.00108
pHpH units608836088
Potassiummg/L20.90.8 - 0.9121.00.7 - 2.0
Sodiummg/L213.512.5 - 14.41211.46.6 - 21.6
Sulphate Dissolvedmg/L1098.777.9 - 122.05677.662.0 - 122.0
Total Dissolved Solids mg/L2253.00250.00 - 256.0012227.83213.00 - 256.00
Total Hardnessmg/L CaCO360168.2153.0 - 186.0360176.2146.0 - 204.0
Total Organic Carbonmg/L102.51.2 - 3.3521.60.9 - 3.3
Trihalomethanesµg/L6024.213.4 - 37.436015.55.3 - 37.4
TurbidityNTU600.05<0.04 - 0.133600.05<0.04 - 0.32
Uraniummg/L2<0.0005<0.0005120.0005<0.0005 - 0.0006
Zincmg/L2<0.005<0.00512<0.005<0.005

Means and ranges are reproduced as reported, including reporting-limit symbols. The original report includes additional parameters and sampling targets.

EPCOR · Original June 2026 summary ↗

These are dated public results for the locations shown, not a current test of your home. “<” means below the stated reporting limit, not zero. The linked reports contain the full results and laboratory notes. Sources checked September 13, 2026. Follow your supplier’s current notices and advisories.

Water questions in Calmar

Are these samples from my home in Calmar?

No. The location in each table identifies where the utility sampled. Regional results provide context for a connected home, but do not establish the result at your tap.

Which treatment should I consider?

The supplier’s hardness results show that dissolved hardness can be relevant to scale, soap performance and appliance care. Use a test at your home to choose softener capacity and settings; an annual average or regional sample is not an equipment sizing measurement.

What if my property uses a private well?

Confirm the source before using these tables. A private well needs its own water analysis; regional municipal results do not describe it.

Explore carbon filtration ↗

Start with your water

Understand the water
at your own taps.

Tell us where you are, what you’re noticing and what space you have. We’ll help you understand the next step.

bottom of page