HydroPure RO
Recommended for every home. Final configuration is selected for the household and verified against the water at the tap.
Explore HydroPure RO ↗top of page
LiveSmart
by Neighbourhood Home Protection
Kelowna and Area: (778) 477-6660
Alberta Area: (780) 229-4475
Saskatchewan Area (306) 790-0551
BC
Water results for Port Alberni
Port Alberni publishes a finished-water summary of average values from ten locations sampled quarterly. The file is identified by the city as extending through the end of 2024.
Understanding your local water
Reading the local results
This summary combines multiple sampled locations. Its hardness and chlorine figures provide background for separate conversations about scale and taste; a combined historical average is not a measurement at your tap.
Connect the report with your home
Confirm the supplier and sample location before comparing the figures. We use the public record alongside testing at your property, household demand and available plumbing to plan treatment and future care.
LiveSmart water-quality summary
Published water-quality measurements.
This page includes the available dated public measurements below. Hardness is shown in grains per gallon where the source provides enough information to report or convert it. Parameters not present in the published source should not be interpreted as zero.
Water results · sources reviewed September 25, 2026
Additional published water measurements.
Finished water · additional published averages
City file through the end of 2024
Published finished-water averages; this source does not establish a single current sample date. Values are copied from the Average column, not the Typical Range or Allowable Limit columns.
| Parameter | Reported result | Unit | Context |
|---|---|---|---|
| Iron | 0.05 | mg/L | |
| Manganese | 0.01 | mg/L | |
| Sodium | 3.12 | mg/L | |
| Sulphate | 2.52 | mg/L | |
| Nitrate + nitrite as N | 0.15 | mg/L | |
| Fluoride | 0.04 | mg/L |
Results apply to the named supply, date and sample location. A “<” result is below the stated laboratory reporting limit, not zero. Hardness conversions use 1 US GPG = 17.118 mg/L as CaCO₃. Parameters without a reported result remain unverified; a missing value is not a zero reading. Source-water results describe water before treatment. Confirm the water at your home before treatment is selected or programmed.
Hardness in grains per gallon.
Conversions of the published hardness results retained on this page. Each row keeps its sample or supply context; these are not additional tests or a single current community average.
View hardness results in GPG
| Sample / source context | Sample date | Hardness (mg/L as CaCO₃) | Hardness (GPG) |
|---|---|---|---|
| Reported value · Finished water · published average values · City file through end of 2024 | See the dated source table below | 46.39 | 2.7 GPG |
1 grain per US gallon = 17.118 mg/L as CaCO₃. Original laboratory units, dates, and source links remain with the water results below.
Local water information
Published water results
for Port Alberni.
Port Alberni publishes a finished-water summary of average values from ten locations sampled quarterly. The file is identified by the city as extending through the end of 2024.
Finished water · published average values
City file through end of 2024
The source states “Average of 10 locations Quarterly tested.” Its averaging start date is not specified. These are the Average Value figures, not the Typical Range or Allowable Limit columns.
| Parameter | Unit | Reported value |
|---|---|---|
| Hardness | mg/L as CaCO3 | 46.39 |
| Total dissolved solids | mg/L | 61.25 |
| pH | pH units | 7.48 |
| Turbidity | NTU | 0.40 |
| Conductivity | µS/cm | 101.16 |
| Total alkalinity | mg/L | 51.13 |
| Free chlorine residual | mg/L | 0.06 |
Selected results are reproduced here. Read the original report for the complete analysis, methods and laboratory qualifiers.
Water Quality Parameters - Annual Averages ↗These are dated public results for the locations shown, not a current test of your home. “<” means below the stated reporting limit, not zero. The linked reports contain the full results and laboratory notes. Sources checked September 15, 2026. Follow your supplier’s current notices and advisories.
Start with your water
Understand the water
at your own taps.
Tell us where you are, what you’re noticing and what space you have. We’ll help you understand the next step.
A LiveSmart recommendation for every home
Better drinking water starts with HydroPure RO.
LiveSmart recommends a HydroPure reverse-osmosis drinking-water system in every home for cleaner, better-tasting water used for drinking, coffee, cooking and ice. Municipal treatment protects the public supply; point-of-use RO provides an additional treatment step at the kitchen tap. Reduction claims depend on the verified system configuration, certification and proper maintenance.
Whole-home treatment
When testing confirms hardness, disinfectant taste or odour, iron, manganese, sediment or microbiological concerns, LiveSmart can add the appropriate SoftFlow, CarbonShield, IronShield or UV Guard treatment.
Explore treatment options ↗Built for the home
Community results are a starting point. Household demand, flow, available space and plumbing are checked before equipment is sized and built.
See real installations ↗Friends for Life
Personal care, through the years.
Your LiveSmart journey continues with commissioning details, My Water Passport, equipment and water-history records, practical support and agreed customer-care follow-up. We help you plan filter changes and service as your home’s needs change.
bottom of page