HydroPure RO
Recommended for every home. Final configuration is selected for the household and verified against the water at the tap.
Explore HydroPure RO ↗top of page
LiveSmart
by Neighbourhood Home Protection
Kelowna and Area: (778) 477-6660
Alberta Area: (780) 229-4475
Saskatchewan Area (306) 790-0551
AB
Lethbridge water hardness
and published results.
Lethbridge water results: hardness 158 mg/L (about 9.2 gpg), TDS 192 mg/L, pH 7.38, iron, manganese and chloramines. March 2026 sources.
LiveSmart water-quality summary
Published water-quality measurements.
This page includes the available dated public measurements below. Hardness is shown in grains per gallon where the source provides enough information to report or convert it. Parameters not present in the published source should not be interpreted as zero.
Published supplier results · March 2026 · Reviewed September 22, 2026
Reported water-quality numbers.
The figures below are the City of Lethbridge Water Treatment Plant’s published March 2026 Water Quality Summary. The distribution-system summary is shown separately. These are dated public results, not a current test of every Lethbridge home.
Reported hardness: 158 mg/L, approximately 9.2 grains per US gallon. The grain figure is a conversion of the published hardness result, not an additional measurement.
| Parameter | Reported result | Unit |
|---|---|---|
| Hardness | 158 (approximately 9.2 grains per US gallon) | mg/L |
| Total dissolved solids (TDS) | 192 | mg/L |
| pH | 7.38 | pH units |
| Iron | < 0.01 | mg/L |
| Manganese | < 0.005 | mg/L |
| Chloramines | 1.87 | mg/L |
| Sulphate | 37.3 | mg/L |
| Sodium | 11.6 | mg/L |
| Nitrate as nitrogen (Nitrate-N) | 0.12 | mg/L |
| Fluoride | 0.80 | mg/L |
| Turbidity | 0.059 | NTU |
| Aluminum | 0.045 | mg/L |
| Chromium | < 0.0005 | mg/L |
| Lead | < 0.0001 | mg/L |
| Trihalomethanes | 0.007 | mg/L |
The < symbol means the result was reported below the stated limit; it does not mean zero. The chloramines result is not a free-chlorine measurement. Local disinfectant residuals can differ from supplier results. Hardness in grains per US gallon is calculated from the reported mg/L value using 17.118 mg/L per grain per US gallon.
Lethbridge distribution-system summary
March 2026 samples from North, South and West Lethbridge. Chlorine residual and bacteriological counts below are the report’s distribution summary, not plant-outlet values.
| Parameter | Reported result | Unit |
|---|---|---|
| Chlorine residual — minimum | 1.04 | mg/L |
| Chlorine residual — maximum | 2.03 | mg/L |
| Chlorine residual — average | 1.70 | mg/L |
| Bacteriological tests — negative | 129 | reported tests |
| Bacteriological tests — positive | 0 | reported tests |
| Bacteriological re-samples | 0 | reported re-samples |
What is not reported in this summary?
Separate calcium, magnesium, alkalinity and hydrogen sulphide values are not listed in this March 2026 summary. A missing value must not be read as zero. Private wells require their own testing.
Official sources
- March 2026 Water Quality Summary — original report ↗
- City of Lethbridge — report index and water-treatment information ↗
- 2025 Consumer Confidence Report — treatment and chloramine explanation ↗
Use community and supplier reports as a starting point. LiveSmart checks the water at the home and the household’s demand, plumbing and flow before recommending or programming treatment equipment.
From the public supply to your tap
Make the information
useful for your home.
Bring the report for your actual supplier and tell us what you notice: scale, staining, taste, odour or a concern with existing equipment. We connect the available information with an assessment at your property.
- Confirm the sourceCheck the supplier on your utility account or identify the private well. Nearby properties can use different water systems.
- Ask for the right recordsLook for the latest drinking-water analysis and the sample location. A treatment-plant result and a distribution-system result describe different points.
- Plan around your householdWater chemistry, daily demand, flow, plumbing and service access shape the equipment recommendation.
A LiveSmart recommendation for every home
Better drinking water starts with HydroPure RO.
LiveSmart recommends a HydroPure reverse-osmosis drinking-water system in every home for cleaner, better-tasting water used for drinking, coffee, cooking and ice. Municipal treatment protects the public supply; point-of-use RO provides an additional treatment step at the kitchen tap. Reduction claims depend on the verified system configuration, certification and proper maintenance.
Whole-home treatment
When testing confirms hardness, disinfectant taste or odour, iron, manganese, sediment or microbiological concerns, LiveSmart can add the appropriate SoftFlow, CarbonShield, IronShield or UV Guard treatment.
Explore treatment options ↗Built for the home
Community results are a starting point. Household demand, flow, available space and plumbing are checked before equipment is sized and built.
See real installations ↗Friends for Life
Personal care, through the years.
Your LiveSmart journey continues with commissioning details, My Water Passport, equipment and water-history records, practical support and agreed customer-care follow-up. We help you plan filter changes and service as your home’s needs change.
bottom of page